Page 18
724-746-5500 | blackbox.com
LongSpan 900-MHz Wireless Ethernet Tube Housing Kit
To wall mount:
1. Remove the tilt mechanism from the bracket and attach it to the housing
mounting holes using (2)
1
⁄
4
-20 x
1
⁄
2
" bolts with lock washers.
2. Hold the bracket to the wall and mark the bracket mounting pattern. Using
the appropriate hardware and methods, secure the bracket to the wall.
3. After securing the bracket to the wall, take the camera housing and align the
tilt mechanism. Insert the
1
⁄
4
-20 x
5
⁄
8
" bolts into the holes and finger tighten.
Figure 4-8. Aligning the housing’s tilt mechanism.
4. Adjust the camera to the desired position and tighten the bolts to prevent
camera housing movement. See Figure 4-9.
Tighten
bolts
Figure 4-9. Tighten bolts.
