Black Box LRB500A, Руководство пользователя

Страница: 103 / 136

100
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS’ MANUAL
3. When the Dial-Up Networking dialog box opens, click Install.
4. Follow the onscreen instructions to configure your connection.
8.2.8 S
ET
D
IAL
-U
P
T
YPE
(NT S
ERVER
C
ONNECTION
)
Windows 95/98:
1. Right-click the newly created connection icon, then click Properties; the My
Connection dialog box opens.
2. On the General tab, click Server Type; the Server Types dialog box opens.
Select PPP: Windows 95, Windows NT 3.5, Internet.
3. Click (to check or enable) only the following items: Log on to network,
Enable software compression , and TCP/IP. [Note: do not disturb any other
items that are already checked.]
8.2.9 D
IAL
I
NTO
Y
OUR NETWORK
(NT S
ERVER
C
ONNECTION
)
Windows 95/98:
1. You are ready to dial into your network.
2. Double-click the new connection icon; the Connect To dialog box opens.
3. Enter the user name (if necessary) and password configured for you on the
Router.
NOTE
If your particular situation permits, click (to check) Save password.
4. Click Connect.
5. After connecting to the Router, you can access the same services and
resources as if you were connected to the network locally.
8.3 Accessing a Novell Server
Novell NetWare ® products are used on up to 70 percent of PC-based local area
networks (LANs). Perform the following procedures when you need to connect
your PC workstation to a remote Novell Server.