Figure 3-3 Reset button and S1—Bit 1, 2, 3, 4, 5, 6 configuration and setting
Reset : Once S1-1, S1-2, S1-3, S1-4 or S1-5 is changed, please press this button to have
the setting taken effect.
S1-1 TP port mode : AUTO(default) or FORCE
S1-2 TP port speed : 100 or 10 when TP at Force
S1-3 TP port duplex : FDX or HDX when TP at Force
S1-4 LFP : LFP enabled(default) or disabled
S1-5 Fiber port duplex : 100FDX(default) or 100HDX
S1-6 PoE ON/OFF : Enable(default) or disable
NOTE
1. S1-2 and S1-3 will take effect only when S1-1 is set at TP-FORCE.
2. S1-5 must be set to 100FDX for Single Fiber Model.
3. S1-6 must be set to PoE ON while power supplies to PD.
Warning
When TP Nway port is connected to TP 100FDX(force mode) instead of
Nway partner, it will result in 100HDX mode with invalid collision
signal.
Ensure that all network nodes are configured at an identical operation
mode. Improper operation and flow control mode between TP and
Fiber port connections will render the LAN to work poorly.
PSE PoE 10/100BASE-TX to 100BASE-FX Media Converter
10
