background image

Federal Communications Commission and Industry Canada Radio Frequency Interference
Statements

Caution

This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in
strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been
tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart
B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the
equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause
interference, in which case the user at his own expense will be required to take whatever measures may be necessary to
correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the
Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a class A computing device pursuant to Subpart J
of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in
a commercial environment.

Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or
walking across a carpeted floor may cause you to acquire a static electrical charge.

To protect your device, always:

Electronic Emission Notice

• Touch the metal chassis of your device to ground the static electrical charge before you pick up the circuit device.

• Pick up the device by holding it on the left and right edges only.

P

age 4

724-746-5500 | blackbox.com

8-Port Fast Ethernet Switch with 4 PoE Ports

Содержание LPB208A-R2













Отзывы: