2
11
PoE Hardened Compact Media Converters
LMC5135A
Hardened PoE, TX/FX-MM1300-ST
LMC5136A
Hardened PoE, TX/FX-MM1300-SC
LMC5140A
Hardened PoE, TX/FX-SM1310/PLUS-ST
LMC5141A
Hardened PoE, TX/FX-SM1310/PLUS-SC
LMC5157A
Hardened PoE, TX/FX-SM1310/LONG-ST
LMC4144A
Hardened PoE, TX/SSFX-SM1310-SC (1310xmt/1550rcv)
LMC5145A
Hardened PoE, TX/SSFX-SM1550-SC (1550xmt/1310rcv)
LMC5148A
Hardened PoE, TX/SSFX-SM1310/PLUS-SC (1310xmt/1550rcv)
LMC5149A
Hardened PoE, TX/SSFX-SM1550/PLUS-SC (1550xmt/1310rcv)
Each
PoE Compact Media Converter
includes one RJ-45 connector for the twisted
pair port and ST or SC connectors for the fiber port. The
PoE Compact Media
Converter
is a 1U high, standalone converter that includes diagnostic LEDs and a
universal (
100/240 VAC
) power supply.
Installing PoE Compact Media Converters
The
PoE Compact Media Converter
comes ready to install; make all config-
urations after installation. To install the media converter first make sure that
the unit is placed on a suitable flat surface. Attach the cables between the
media converter and each device that will be interconnected, then plug the
unit into a reliable, filtered power source.
Configuring PoE Compact Media Converters
Each
PoE Compact Media Converter
features an
8-position DIP switch for configuring the unit after
installation. Access this switch through a cut-out in
the bottom of the unit. After configuring the DIP
switch, power down the unit and then power up
again for the changes to take effect. Default settings
for the following features are shown to the right.
• TX LinkLoss • FX LinkLoss
• FiberAlert (Pulse) • Pulse (FiberAlert)
• Auto-Negotiation •PSE
Bottom view of PoE media converter
IMPORTANT!
The
Hardened PoE Compact Media Converters
also include an internal
fan. This fan automatically turns ON only when the internal temperature
of the unit exceeds 45° C. Please refer to page 8 for temperature speci-
fications. The
PoE Compact Media Converter
does not require a fan.
NOTES:
