Black Box LGS103AE, Руководство по установке

Страница: 25 / 94

– 24 –
C
HAPTER
1
| Introduction
Overview
Figure 1: Front Panels
LGS104AE
Port Status LEDs
Stack ID
Serial Console Port
LGS103AE
10/100/1000 Mbps RJ-45 Ports System Status LEDs
SFP Slots
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
21 22 23 24
Stack ID Master
Select
Console
Figure 2: Rear Panel
Power Socket
Redundant Power Socket Module Slots Stacking Ports
S
WITCH
A
RCHITECTURE
These Gigabit Ethernet switches employ a wire-speed, non-blocking switching
fabric. This permits simultaneous wire-speed transport of multiple packets at low
latency on all ports. The switches also feature full-duplex capability on all ports,
which effectively doubles the bandwidth of each connection.
For communications between different VLANs, these switches use IP routing. For
communications within the same VLAN, they use store-and-forward switching to
ensure maximum data integrity. With store-and-forward switching, the entire
packet must be received into a buffer and checked for validity before being
forwarded. This prevents errors from being propagated throughout the network.
These switches include built-in stacking ports that enable up to eight units to be
connected together through a 48 Gbps stack backplane. The switch stack can be
managed from a master unit using a single IP address.
These switches also include two slots on the rear panel for slide-in single-port
10GBASE modules with XFP transceivers.