Black Box LGH1000 Series, Руководство пользователя

Страница: 14 / 20

724-746-5500 | blackbox.com
Page 14
Chapter 3: Installation
3.2.5 Cabling
Ethernet Cabling:
Ports 1–4 use copper UTP/STP cable.
Table 3-2. Cable types for data transmision.
Description
10BASE-T: 2-pair UTP/STP CAT3, 4, 5 cable, EIA/TIA-568, 100-ohm, Max. 328 feet (100 m)
100BASE-TX: 2-pair UTP/STP CAT5 cable, EIA/TIA-568, 100-ohm, Max. 328 feet (100 m)
1000BASE-T: 4-pair UTP/STP CAT5 cable, EIA/TIA-568, 100-ohm, Max. 328 feet (100 m)
NOTE: For optimum data transmission and power delivery in any speed, use CAT5 cable or above.
Fiber port
Port 5 houses a fiber transceiver (SFP). See the table below for compatible SFPs.
Table 3-3. Compatible SFPs.
Part Number Description
LFP411 SFP, 1.25-Gbps Fiber with Extended Diagnostics, 850-nm Multimode, LC, 300 m
LFP412 SFP, 1.25-Gbps Fiber with Extended Diagnostics, 1310-nm Multimode, LC, 2 km
LFP413 SFP, 1.25-Gbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, LC, 10 km
LFP414 SFP, 1.25-Gbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, LC, 30 km
LFP416 SFP with SGMII Interface, 1.25 Gbps, Copper, 10/100/1000BASE-T, Extended Diagnostics
SFP Installation
Before installing the SFP transceiver, make sure the SFP type at both ends of the link is the same and the transmission distance,
wavelength, fiber cable are correct for your application.
At both ends of the connection, simply plug the SFP transceiver into the switch, then connect the fiber cable.