Black Box LEP0002A, Руководство пользователя, Страница: 86 / 129

83
CHAPTER 8: Configuration Utility
Table 8-6 (continued). DHCP setting parameters.
Parameter Description
Gateway This is the print server’s gateway address.
DNS This is the print server’s domain name address.
OK button Click on this button to save the DHCP selections.
Cancel button Click on this button to cancel the DHCP choices.
8.3.6 W
IRELESS
C
ONFIGURATION
If you want to use the print server through a wireless LAN, set up the print server
through Ethernet first and make sure your wireless LAN setting is correct. After
setting the wireless LAN, unplug the Ethernet cable and restart the print server;
you can then start to use the print server through the wireless LAN. If the wireless
configuration does not work, plug in the Ethernet cable again, restart the print
server, and configure the print server through Ethernet until the wireless LAN
settings are correct.
Double click on the wireless icon in Figure 8-3. The wireless configuration window
will appear (see Figure 8-10).
If you used an access point to build up the wireless network, select Infrastructure
Mode
. Select
Next
. Figure 8-11 will appear.
If you do not have an access point and want to use a peer-to-peer connection to
build the wireless network, select
Ad-Hoc Mode (Figure 8-10). Select Next .
Both infrastructure and ad-hoc mode have to go through the following procedure.