10
NETWORKING HUB
3. Installation
3.1 Before You Install: Inspect the Complete Package
Inspect the contents of the package for any signs of damage, and make sure that
you received these items. If anything is missing or damaged, please return the
package to its place of purchase.
• (1) Networking Hub (8-Port, 10BASE-T).
• (1) External 120-VAC, 60-Hz power supply.
• This users’ manual.
Remove the hub from the shipping container. Keep the container in case you need
to re-package the unit later.
3.2 The Installation Procedure
Installing a Networking Hub is very simple. First, keeping in mind that it must be
within 6 feet (1.8 m) of an AC outlet, decide how and where you’re going to
mount the Networking Hub.
3.2.1 P
OSITIONING THE
N
ETWORKING
H
UB ON A
T
ABLE OR
S
HELF
The Networking Hub can be placed on a table or shelf, and has four rubber feet to
provide stability without scratching finished surfaces. When properly positioned,
the LED status indicators will be in plain view and easy to read.
The hub’s rugged, metal case will protect it from accidental damage in your home,
office, or lab. Keep an open area around the unit so that convection cooling can
occur while the unit is operating.
3.2.2 P
OWERING
U
P THE
H
UB
Once you’ve positioned the Networking Hub, plug the included external power
supply’s DC power cord into the matching power jack on the hub’s rear panel.
Plug the power supply’s transformer into an AC receptacle that is 6 feet (1.8 m) or
less away. The green PWR LED should light. Now you are ready to begin attaching
Ethernet cables, as described in
Section 3.2.3
.
Содержание LE2750A
Страница 2: ......
