24/7 Tech Support Call: 724 746-5500 (Outside U.S.A. Call: 724 746-5500)
Page 3 of 8
Install the Fiber Cable
1. Locate or build 10Base-FL compliant fiber cable with male, two-stranded TX to RX connectors
installed at both ends.
2. Connect the fiber cables to the media converter as described:
Connect the male
TX
cable connector the female
TX
port.
Connect the male
RX
cable connector to the female
RX
port.
1. Connect the fiber cables to the other device (another media converter, hub, etc.) as described:
Connect the male
TX
cable connector the female
RX
port.
Connect the male
RX
cable connector to the female
TX
port.
Power the Media Converter
1. Install the power adapter cord to the back of the media converter.
2. Connect the power adapter plug to AC power.
3. Verify that the media converter is powered by observing the illuminated LED power indicator light.