16-Bay Media Converter Chassis
12 User’s Manual
Ethernet data
Ethernet Connection in full duplex
mode
Steady
Fdx stands for FULL-DUPLEX
Flashing Collision
occurred
Fdx
Off
Ethernet Connection in half-duplex
mode
Ethernet over VDSL
Green
The VDSL port transmitting/receiving
at 1Mbps, up to 1900M
1
Amber
The VDSL port transmitting/receiving
at 3Mbps, up to 1700M
Green
The VDSL port transmitting/receiving
at 5Mbps, up to 1600M
2
Amber
The VDSL port transmitting/receiving
at 10Mbps, up to 1500M
Green
The VDSL port transmitting/receiving
at 15Mbps, up to 1400M
3
Amber
The VDSL port transmitting/receiving
at 20Mbps, up to 1000M
Green
The VDSL port transmitting/receiving
at 25Mbps, up to 800M
4
Amber
The VDSL port transmitting/receiving
at 30Mbps, up to 600M
Rmt
Steady
The device operates in remote mode
Loc
Steady
The device operates in local mode
Err Steady
Error
occurred
Lnk
Steady
A valid VDSL connection established
Step 1:
To install a media converter onto any of the carriers, you have to unscrew the carrier from the desired bay first.
Step 2:
Fit the media converter onto the carrier.
Step 3:
When the media converter is completely seated onto the carrier, insert the carrier to the guide rails of the bay slot.
Step 4:
Carefully slide in the carrier until it is fully and firmly fitted to the power socket. Fasten the screws on the carrier.
L
i.
The chassis is designed to house only the proprietary media converters.
ii.
Never insert any media converter into the chassis directly without using the supplied carriers. These carriers allow secure and
consistent placement of the media converters into the chassis’ backplane without causing any damage.
iii.
For details, please refer to the User’s Manual for media converters.
