Black Box KV9304A, Руководство пользователя

Страница: 23 / 85

21
CHAPTER 3: Installation
Figure 3-13. HyperTerminal screen.
9. Follow the instructions on the screen. For example, simply type
I
to set your
IP, type
F
to reset everything back to factory defaults, and so on.
NOTE
Remember to type
W
after you make any changes.
3.2 Disabling the Mouse Acceleration on the Computers
Many operating systems offer a feature called mouse acceleration that allows the
user to adjust the responsiveness of the cursor on the screen to physical
movements of the mouse. While this is usually a beneficial interface enhancement,
it can interfere with the ServSwitch unit’s operation and should be disabled on the
managed computers before you attempt a remote session. Follow the instructions
in
Sections 3.2.1 through 3.2.3 , depending on your operating system, to disable
mouse acceleration for the operating system installed on each managed computer.
3.2.1 W
INDOWS
98
AND
W
INDOWS
2000
1. From the Control Panel, click on Mouse .
2. From Mouse Properties, click on the
Motion
tab.
3. Make sure that the Pointer speed bar is centered and Acceleration is set to
None.