FEED-THROUGH CAT5E PATCH PANELS
2
Specifications
Standards:
Category 5e
Connectors:
JPM804A-R2: (24) shielded RJ-45 on front, (24) shielded RJ-45 on back;
JPM806A-R2: (48) shielded RJ-45 on front, (48) shielded RJ-45 on back;
JPM808A-R2: (24) unshielded RJ-45 on front, (24) unshielded RJ-45 on back;
JPM810A-R2: (48) unshielded RJ-45 on front, (48) unshielded RJ-45 on back
Size:
JPM804A-R2, JPM808A-R2: 1.75"H (1U) x 19"W x 4.5"D (4.4 x 48.3 x 11.4 cm);
JPM806A-R2, JPM810A-R2: 3.5"H (2U) x 19"W x 4.5"D (8.9 x 48.3 x 11.4 cm)
Weight:
JPM804A-R2: 1.6 lb. (0.7 kg); JPM806A-R2: 2.9 lb. (1.3 kg); JPM808A-R2: 1.3 lb. (0.6 kg);
JPM810A-R2: 2.3 lb. (1 kg)
Introduction
The Feed-Through CAT5e Patch Panels meet Category 5e performance requirements and provide patching
without punching down the wires to the ports. These sturdy panels install in relay racks or communications
cabinets.
After ordering a CAT5e Patch Panel, you should have received the following items:
• (1) CAT5e Patch Panel
• (1) Cable management bar for JPM804A-R2 and JPM808A-R2, or
(2) Cable management bars for JPM806A-R2 and JPM810A-R2
• (4) 10-32 cuphead screws
• (4) 12-24 cuphead screws
• This users’ manual
If anything is missing or damaged, please contact Black Box at 724-746-5500.
