Black Box iPATH ACR1000A-CTL-192 Скачать руководство пользователя страница 72

Страница: 72 / 101

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

C.3.3 STARTING FROM SCRATCH

If none of the above procedures are used, then the following will be necessary. This will require a certain amount of effort because
each Agility unit must be visited and reset, plus the iPATH database will need to be fully reconfigured.

1 Place a new iPATH Agility Controller into the network and then perform a factory reset on every Agility device. This will force the

Agility units back to their default states whereupon they will announce themselves to the new iPATH Agility Controller.

2 Use a computer connected to the same network to login to the new iPATH Agility Controller management suite and begin to

recreate the database of devices and users.

Содержание iPATH ACR1000A-CTL-192






































































































Результаты поиска

Содержание iPATH ACR1000A-CTL-192

Отзывы:

Black Box iPATH ACR1000A-CTL-192, Руководство пользователя, Страница: 72 / 101

Результаты поиска

Содержание iPATH ACR1000A-CTL-192

Отзывы: