Black Box IC454A, Руководство пользователя

Страница: 15 / 22

12
ACTIVE CCTV RECEIVER HUB, 16-PORT
Figure 3-3. Hub with wallmount brackets.
4. Install the hub on the wall using the proper mounting hardware.
3.3 Installation Procedure for IC454A or IC454AE
The IC454A or IC454AE (UTP/UTP) allows the unit to be installed in a remote
wiring location away from the central monitoring equipment. The hub may be
installed up to 500 feet (152.4 m) away from the DVR via CAT5 UTP cable. In
order to install the product in this configuration, follow the steps below.
1. Install the Active CCTV Receiver Hub. Verify that the distance between the
hub and cameras and between the hub and DVR are within the specifications
described in
Chapter 1 .
2. Connect a passive CCTV balun (part number IC440A, IC444A, IC451A, or
IC452A) to each CCTV camera video output port. Refer to the balun’s users’
manual for details.
3. Connect one twisted pair from each camera to one port on the rear of the
Active CCTV Receiver Hub. Make sure that straight-through polarity is
respected between the CCTV balun and the hub. Multi-pair cables are
supported as long as they are Category 5 or better. See Figure 3-4.
Wallmount bracket