9
CHAPTER 3: Installation
7. Plug the other end of each UTP cable into the appropriate modular wall
outlet or patch panel. When this is done, a complete cabling circuit should
run between the two baluns, as shown in Figures 3-2 and 3-3.
Figure 3-2. Baluns cabled together for video distribution (not to scale).
Figure 3-3. Baluns cabled together for cable-modem extension (not to scale).
8. Reconnect and power up the source and destination equipment.
Your balun system should be ready for continuous operation.
Category 5 UTP
Category 5 UTP
Video CATV
Baluns
Video CATV
Baluns
Video CATV
Balun
Wall outlet
with coax
“F” connector
Video CATV
Balun
Cable
modem
LAN
cable
PC
CATV
splitter
Tilt
amplifier
75-ohm
coax
CATV
feed
CATV
feed
TV monitors
