26
USB X-TENDER
6. Troubleshooting
6.1 Things to Try
If you have any problems operating your USB
peripherals through the USB X-Tender, here are a few
possible solutions you can try:
•
Disconnect/reconnect:
Your first step should be to
unplug and replug your peripherals one at a time:
first the device on channel 1, then the device (if
there is one) on channel 2. Within a few seconds,
the host computer might recognize the
peripherals.
•
Reset the system:
If that doesn’t work, reset the
USB X-Tender system by disconnecting the Host-
Interface Module from the host computer. (If
both channels are being used, disconnect both
USB cables, starting with the channel 1 cable.)
Wait 10 seconds and then reconnect the cables.
This procedure will reset all connections;
hopefully, the peripherals will now work.
