15
CHAPTER 4: Running the Cable Program
4. Running the
USB 2.0
↔
USB 2.0
Data Transfer Cable
Program
The USB 2.0
↔
USB 2.0 Data Transfer
Cable allows you to easily link two
computers by plugging an end of the
cable into the USB port of both
computers. Before you can start using
the cable program, you must run the
setup program, then install the cable
and software on the local computer as
mentioned in
Chapter 3
. Then repeat
this setup and installation procedure
on the remote computer.
Windows will detect the cable on the
computer and check if it is properly
installed. Use the same program mode
(ANSI or Unicode) for each
computer.
PCLinq2 is the application program
used to control the file sharing and
data transfer of linked computers (the
local and remote PCs). After you have
successfully completed the setup
program, and installed the cable and
