background image

1

FCC STATEMENT 

FEDERAL COMMUNICATIONS COMMISSION

and INDUSTRY CANADA

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a computing
device pursuant to Part 95 of the FCC Rules.

FCC Rules Part 95

Do not make adjustments that could result in a violation of the rules or that are
recommended to be performed by or under the immediate supervision and
responsibility of a person certified as technically qualified to perform transmitter
maintenance and repair duties in the private land mobile services and fixed services by
an organization or committee representative of users of those services.

WARNING

Replacement of any transmitter component (crystal, semiconductor,
etc.) could result in a violation of the rules.

This digital apparatus does not exceed the Class B limits for radio noise emission from digital
apparatus set out in the Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de classe B prescrites dans le Règlement sur le brouillage
radioélectrique publié par Industrie Canada.

Содержание FX801A-R2




























Отзывы: