18
CAMPUS PAGER
2. Press CANCEL to clear display.
3. Press PROGRAM, then 0. The TRANSMIT display will show the stored
system code momentarily, then ___will appear (after pressing PROGRAM,
the display flashes).
1
7
4
8
5
2
0
9
6
3
P
CANCEL
GROUP
PAGE
PROGRAM
Figure 5-1. The Campus Pager Keypad.
4. Enter a 3-digit system code. After about 1 second, the display shows
----, indicating that the system code is stored.
5. If you enter a wrong code, repeat Steps 2 through 4 to reset the system
code.
NOTE
If your application requires more than 1000 system pagers, you can use
multiple Campus Pager systems. If using more than one Campus Pager,
each system should have a unique system code.
