24
TOTE-A-FAX 542
COMMAND
FACTORY DEFAULT
DESCRIPTION
+FRS=n
n=0
Receive Silence
. +FRS=n causes the modem
to report back to the DTE with an OK result code
after n 10 millisecond intervals of silence have
been detected on the line. This command is
aborted if any command character is received.
The modem discards the aborting character and
issues an OK result code. An ERROR response
code results if this command is issued while the
modem is on-hook.
+FTM=n
N-48
Transmit Data
. +FTM=n causes the modem to
transmit data using the modulation technique
defined below. An ERROR response code
results if this command is issued while the
modem is on-hook.
+FTM=24
V.27 ter 2400 bps
+FTM=48
V.27 ter 4800 bps
+FTM=72
V.29 7200 bps
+FTM=96
V.29 9600 bps
+FTH=n
n=3
Transmit Data with HDLC Framing
. +FTH=n
causes the modem to transmit data framed in
HDLC protocol using the modulation defined
below. An ERROR response code results if this
command is issued while the modem is on-hook.
+FRH=3
V.21 Channel 2 300 bps
+FRTn
n=48
Receive Test Data
. +FRTn causes the modem
to go off-hook and begin demodulating received
data at the specified rate.
n
Configuration/Data Rate
n=24
V.27 ter 2400bps
n=48
V.27 ter 4800 bps
