Black Box Corporation
1000 Park Drive, Lawrence, PA 15055-1018
USA, Canada: www.blackbox.com,
EU, Africa, Asia, South America, Australia: www.blackbox.eu
114
Chapter 5: Troubleshooting
5.1 Basic Functionality
This section deals with issues regarding your Firetunnel 30’s basic functions.
5.1.1 Router Won’t Turn On
If the Power and other LEDs fail to light when your Firetunnel 30 is turned on:
- Make sure that the power cord is properly connected to your firewall and that the
power supply adapter is properly connected to a functioning power outlet.
- Check that you are using the 12VDC power adapter supplied with this unit
originally.
If the error persists, you may have a hardware problem, and should contact
technical support.
5.1.2 LEDs Never Turn Off
When your Firetunnel 30 is turned on, the LEDs turn on for about 10 seconds and
then turn off. If all the LEDs stay on, there may be a hardware problem.
If all LEDs are still on one minute after powering up:
- Cycle the power to see if the router recovers.
- Clear the configuration to factory defaults.
If the error persists, you may have a hardware problem, and should contact
technical support.
5.1.3 LAN or Internet Port Not On
If either the LAN LEDs or Internet LED do not light when the Ethernet connection is
made, check the following: