10
GPS Network Time Server
SALES: 0118 965 5100
Quick Start Guide
This section breaks down the installation of the GPS Network Time Server, into an easy to
follow step-by-step guide.
Step One – connecting the server to a configuration terminal
After unpacking your GPS Network Time Server, connect it to a PC for configuration. Take
the configuration cable, (EHNU9071) and plug the 8-pin DIN connector into the port labelled
“RS232” on the back of the server. Connect the 9-pin D type connector into a free comm
port on your PC.
Now take the CD supplied with the GPS Network Time Server and insert it in to your CD
drive. Your PC will now automatically load the software and take you through to the
welcome screen. From here to create a new session you must select MANAGE and then
NEW.
You are now presented with a screen that looks as follows:
