Black Box CONFERENCE 1 PHONE, Руководство пользователя

Страница: 12 / 36

11
CHAPTER 3: Installation
3.2 Safety Precautions
IMPORTANT NOTE
You should read and understand the warnings and instructions in this
section before you place, install, operate, or maintain the Conference 1.
Take these precautions in order to avoid having problems with your Conference 1:
• Follow all of the instructions and warnings printed on the Conference 1’s
housing.
• Do
not
put anything on top of the Conference 1, and don’t allow papers or
other objects to obstruct its microphones.
• Do
not
allow anything to rest on the cords and cables connected to your
Conference 1.
• Do not put your Conference 1 where its cords can be walked on.
• Be careful not to overload wall outlets and extension cords; doing so poses a
risk of fire or electric shock.
• Never push objects of any kind into the openings on your Conference 1’s base
unit or power supply. Objects might touch dangerous voltage points or short
out parts, which could also pose a risk of fire or electric shock.
• Try not to spill liquid of any kind on your Conference 1’s base unit or power
supply. If this ever happens, do not continue to use the Conference 1; use
another phone to call Black Box Technical Support.
• Never try to disassemble your Conference 1’s base unit or power supply. They
don’t contain any user-serviceable parts; opening them can expose you to
dangerous voltages and other risks; and reassembling them incorrectly can
cause equipment damage and/or electric shock the next time the
Conference 1 is operated. Instead, call Black Box Technical Support to
arrange to have the Conference 1 repaired.
• Avoid using your Conference 1 during an electrical storm. There can be a
remote risk of electric shock from lightning.
• Do
not
use your Conference 1 to report a gas leak. The phone’s buttons route
electrical signals when pressed. These signals can ignite gas fumes, which
could cause a fire or explosion. Instead, report the leak from another location
that’s not involved.