Page 12
724-746-5500 | blackbox.com
Multi-Input Digital Scaler with Audio
Table 2-2. Back-panel components.
Number
Component
Description
7
DB9 connector
Links to RS-232 serial console.
8
Audio connector Links to digital audio input.
9
Composite Video Use a Composite video cable to connect the
(CV)
composite video output of the source equip-
ment to the connector labeled “CV” on the
back of the Video Scaler. The format can be
NTSC or PAL. This channel accepts stereo audio
input via (2) RCA connectors.
10
HDMI output
Use an HDMI cable to connect the HDMI input
of the source equipment to the device. This
channel accepts digital audio output via HDMI
or stereo audio via a 3.5-mm audio jack.
11
HDMI input
Use an HDMI cable to connect the HDMI
output of the source equipment to the device.
This channel accepts digital audio input via
HDMI or stereo audio via a 3.5-mm audio jack
(TRS —Tip, Ring, and Sleeve).
12
PC input
Connect the source computer’s VGA output
signal to the HD15 connector labeled “PC” on
the device. This channel accepts stereo audio
input via a 3.5-mm audio jack (TRS—Tip, Ring,
and Sleeve).
13
YPbPr
Use a 3 RCA-to-3 BNC YPbPr cable to connect
the YPbPr output of the source equipment to
the device. The format can be NTSC or PAL.
This channel accepts stereo audio input via (2)
RCA connectors.
14
S-Video
Use an S-Video cable to connect the S-Video
output of the source equipment to the connec-
tor labeled “S-Video” on the back of the Video
Scaler. The format can be NTSC or PAL. This
channel accepts stereo audio input via (2) RCA
connectors.
15
Power connector Links to power source.