manualshive.com logo in svg

Black Box Async 232 422/530, Руководство пользователя, Страница: 24 / 28

Поделиться
Скачать
Black Box Async 232 422/530 Скачать руководство пользователя страница 24

26

• The green “PWR” LED glows when power is being applied to the

modem card through its mid-plane chassis connection.

• The green “TD” and “RD” LEDs blink to show positive state data

activity. The red “TD” and “RD” indicators blink to show negative state
data activity. A solid red light indicates an idle state.

• If your carrier-detect strap is configured as “Always On,” the “CD” LED

will always be green. If the carrier-detect strap is set to “Normal,” the
green LED lights when the carrier is on; the red LED lights when the
carrier is off.

5.2  Power-Up

There is no power switch on the Async 232

↔

422/530 Card: Power is

automatically applied to the Async 232

↔

422/530 Card when its card-edge

connector touches the chassis’s mid-plane socket, or when the chassis’s power
is turned on.

NOTE

The Async 232

↔

422/530 Card is a hot-swappable card—it will not be

damaged by plugging it in or removing it while the rack is powered up.

CHAPTER 5: Operation

Содержание Async 232 422/530





























Отзывы:

Нет отзывов