manualshive.com logo in svg

Black Box Async 232 422/530, Руководство пользователя, Страница: 16 / 28

Поделиться
Скачать
Black Box Async 232 422/530 Скачать руководство пользователя страница 16

18

CHAPTER 3: Configuration

Line Shield (JB2 and JB4)

This jumper pertains to the line interface. In the connected position, the
jumper links RJ-45 pins 2 and 7 to frame ground and the rear panel. These
pins can be used as connections for the twisted-pair cable shield. In position 
2 and 3, pins 2 and 7 are disconnected from frame ground.

JB2 and JB4

Position 1 & 2

= Line Shield A and B Connected to Frame Ground

Position 2 & 3

= No Shield

DTE as DSR or RI (JB6 and JB7)

Because this rear card is designed to function in more applications than the
Async 232

↔

422/530 Card, this jumper must be installed only in one position.

Place the jumper across pins 1 and 2 so that the terminal (DTE) sees DSR as
high when the rack is powered. The other positions, across pins 2 and 3, are
for Ring Indicate as defined by EIA/TIA-561. The RI function is irrelevant
(and on the Async 232

↔

422/530 Card is also disconnected) and can cause

improper operation if the jumper is installed incorrectly.

JB6 and JB7

Position 1 & 2

= DSR

Position 2 & 3

= N/A    (Do not use.)

SGND and FRGND (JB5)

In the connected position, this jumper links RJ-45 pin 5 (Signal Ground) and
frame ground through a 100-ohm, 

1

⁄

2

watt resistor. In the open position, pin 1

is disconnected from frame ground.

JB5

Position 1 & 2

= SGND (Pin 5) and FRGND Connected

Position 2 & 3

= SGND (Pin 5) and FRGND Not Connected

Содержание Async 232 422/530





























Отзывы:

Нет отзывов