![Black Box ACUMREM Скачать руководство пользователя страница 37](http://html1.mh-extra.com/html/black-box/acumrem/acumrem_installation-manual_2761219037.webp)
36
SERVSWITCH™ BRAND CAT5 KVM EXTENDER STANDALONE REMOTES
4.2.5.B Attaching a KVM Switch with Single Composite CPU-Port Connectors
Run a CPU Cable designed for the KVM switch—refer to your Extender system’s
user manual for product codes—from one of the switch’s CPU-port connectors to
the user-port connectors of the Remote, as shown in Figure 4-8 below and
Figure 4-9 on the next page.
NOTES
If the switch is a ServSwitch Multi, keep these things in mind as you
match the serial and audio cables/strands:
– The proper DB9 serial connector to use on its User Cable is the
one
without
a yellow band.
– The audio cable from the Extender’s “audio out” connector should
be plugged into the
blue-banded
audio connector on the User Cable.
– The audio cable from the Extender’s “audio in” connector should
be plugged into the audio connector
without
a blue band on the User
Cable.
Also bear in mind that the microphone strand of the ServSwitch
Multi User Cable (the one with the
blue-banded
connector) is mono only,
so any stereo information that passes through this strand will be lost.
Figure 4-8. Attaching a KVM switch with single composite CPU-port
connectors to the user-port connectors on an ACUMREM Remote Unit
(top) or any other type of Remote Unit (bottom, ACUVREM shown).
ServSwitch Multi EXP (KV160A-R2)
ACUVREM
KV2040-R2
(plugs into
CPU Card)
Regular ServSwitch (KV3108SA-R4)
ACUMREM
EHN230
Содержание ACUMREM
Страница 1: ......
Страница 44: ...43 APPENDIX B Rackmounting Remotes Figure B 2 Mounting the bracketed Remote Hub above or Remote Unit below...
Страница 51: ...NOTES...
Страница 52: ......