Black Box ACUMREM, Руководство по установке

Страница: 35 / 52

34
SERVSWITCH™ BRAND CAT5 KVM EXTENDER STANDALONE REMOTES
Figure 4-6. Attaching user equipment to a user port on a Remote Hub.
4.2.5 A
TTACHING A
KVM S
WITCH TO THE
U
SER
P
ORT
The way you’ll do this will depend on whether the KVM switch’s CPU ports are
multiple connectors (see
Section 4.2.5.A ) or single composite connectors (see
Section 4.2.5.B ). (Refer to the listings in your Extender system’s user manual for
which switch models are in which category.)
4.2.5.A Attaching a KVM Switch with Multiple CPU-Port Connectors
Run extension cabling from the Remote’s user-port connectors to the matching
CPU-port connectors on the KVM switch. This extension cabling can be individual
keyboard-, video-, and mouse-extension cables (product codes EVMPS03-MM for
keyboard and mouse, EVNPS05-MM for video), but we recommend our specially
bonded three-to-three CPU-extension cable (product code EHN408):
• If you’re using individual extension cables, run the video-extension cable
between the two video/monitor connectors, the keyboard-extension cable
between the two keyboard connectors, and the mouse-extension cable between
the two mouse connectors.
• If you’re using one of our three-to-three bonded extension cables, run the
cable’s video strand between the two video/monitor connectors, the cable’s
keyboard strand between the two keyboard connectors, and the cable’s mouse
strand between the two mouse connectors, as shown in Figure 4-7 on the next
page.(The keyboard and mouse connectors on the bonded cable have
different colors and icon labels for easy identification.)
ACU1006MRA or
ACU1006MRVA
Remote Hub
(Serial and audio devices plug
into ACU1006MRVA only)