LRXI Industrial Fiber Extender
877-877-2269 | blackbox.com
Page 28
PWR
USB
VID
LNK
LNK
This indicator will be on
once the link between
the local and remote
units is established.
Flashes to warn that
a non-approved SFP
module has been fitted.
VID
This indicator will
be on (on both
units) when a valid
video signal is
detected.
USB
This indicator will be on
once the USB extender
and hub located within
the remote unit have been
successfully enumerated
by the USB host on your
computer.
Flashes to indicate the USB
system has entered suspend
mode. Ensure that one
or more USB devices are
attached to the remote unit
and a valid USB link is made
between the local unit and
the host computer.
PWR
This indicator will
be on when power
is supplied to each
unit.
Green
This indicator will be on
whenever there is a valid
link between the local unit
and a network switch.
Amber
This indicator will flash
when data is being
transferred.
5. Operation
The LRXI Industrial Fiber Extender units are designed to be transparent in operation; all peripherals should respond exactly as they
would when situated next to your host computer.
5.1 Indicators
The local and remote units contain various indicators to provide you with status information. Both units have four red indicators
on their front panels.
5.1.1 Red status indicators
The red status indicators on the front panels
of each unit mostly behave in the same
manner at the same time:
5.1.2 Green and amber status indicators (local unit only)
The green and amber status indicators on the network management port connector of the local unit (rear panel) provide further
status information:
