Dual Link DVI/USB Extender SRX
724-746-5500 | blackbox.com
Page 16
3.2.2.5 Power connection
1 Connect the output lead of the supplied power adapter to the socket labeled ‘
POWER
‘ on the remote module as shown in
Figure 3-13:
Figure 3-13. Attaching the power adapter connection
2 Insert the IEC connector of the separate power cord into the corresponding socket of the power adapter as shown in Figure
3-14:
Figure 3-14. Connecting the power cord to the adapter
3 After all connections are made, power up the display screen and connect the other end of this power cord to a nearby mains
outlet. Then power up the local module and finally switch on the computer. This will allow each item, in order, to correctly dis-
cover the one immediately downstream.
Note: Please pay close attention to
the power related items within the
Safety information section.
