Chapter 3: Installation
724-746-5500 | blackbox.com
Page 15
3.2.2.3 Link connections
1 Connect the link cable (see page 2 for cable advice) to the remote module socket labeled
TO LOCAL
as shown in Figure 3-11:
Figure 3-11. Attaching the CATx link cable
3.2.2.4 Speaker connection
Optionally link stereo speakers to the remote module using 3.5mm audio cable.
Figure 3-12. Attaching speakers to the remote module
IMPORTANT:
• This is NOT an Ethernet port and must not be connected to network switches
or any device other than the remote module.
• These extenders are NOT compatible with the standard DVI/USB SRX (single
link) versions. Where both types are being used in close proximity, take care
not to cross connect the local and remote modules between the two versions.