DVI-D KVM EXTENDER-PC DVI- KVM-EXTENDER
DVI-D KVM EXTENDER-PC DVI- KVM-EXTENDER
DVI-D KVM EXTENDER-PC DVI- KVM-EXTENDER
DVI-D KVM Extender KVM-Extender Type ACS4001A Local/ Remote Unit
DVI-D KVM Extender KVM-Extender Type ACS4201A Local/ Remote Unit
3.1 Diagnostic LEDs
Each DVI-D KVM Extender KVM-Extender is fitted with four indicator LEDs:
Power, Video OK,
Data Error, Link Status
: The
Power
LEDs are next to the Power socket.
The location of the LEDs is shown below:
Diagnostic - LEDs at DVI-D KVM Extender - Extender
LED
Appearance
Diagnostics
Power LED
(Red LED)
Off
On
Device not ready
Device ready
Video Okay
(Green LED)
Off
On
No or invalid video signal detected
Device ready
Link Status
(Green LED)
blinking
On
No CAT5 connection
Device ready
Data Error
(Green LED)
Off
blinking / On
Device ready
Errors through data transmission over CAT5 Cable
(Cable too long, too high attenuation or too much
EMI interferences )
4 Troubleshooting
There isn’t a picture.
Check the power supply connection at the Local unit. Is the
Power
(Red LED) at the Local
unit illuminated? If not, the internal power-supply may be damaged or there may be an
internal error.
Check the power supply connection at the remote unit. Is the
Power
(Red LED) at the
Remote unit illuminated? If not, the internal power-supply may be damaged or there may
be an internal error.
Check that the Interconnection cable is connected at the Local Unit and the Remote Unit.
Is the
Link Status
LED illuminated? If not, there may be a problem with the
Interconnection cable:
Are there
Errors through data transmission over CAT5 Cable (Cable too long, too high
attenuation or too much EMI interferences )? Is the
Data Error
LED illuminated or
blinking? If yes, check cable length and environment.
Video Okay
LED is dark: CPU does not provide a video signal – Check settings of the
graphic card. Try out, connecting a monitor to the local output, to see, whether ther is a
signal or not.
USB-Keyboard/USB-Mouse
Your USB-keyboard/USB-mouse does not work
Although we tried to design the devices as transparent as possible, we can’t ensure that all
devices are running. Please check in the manual the list of the tested devices.
USB-HID devices
Your USB-HID device does not work
Although our interface supports HID devices, we can’t ensure that every connected device
is running. In case of a malfunction please contact our technical support.
Other USB-devices
Your USB- device does not work
You have connected a non-HID device. Only HID devices are supported. All other devices
are dismissed
DVI-D-CatX-KVM-Extender
Single and DualHead
ACS4001A
ACS4201A
(Quick Setup)
http://www.blackbox.com
Black Box Network Services -
The world’s largest network services company
We are, with 25 years of experience, the world leader in network infrastructure services.
Connect to 5V Power
supply
Connect to 5V Power
supply
Diagnostic LED
Power
Diagnostic LED
Video OK
Diagnostic LED
Data Error
Diagnostic LED
Link Status
INTERCONNECT – carries video and
data signals – connect to Local/
remote unit with CATx cable
INTERCONNECT – carries 2
nd
video
signal – connect to Local/ remote unit
with CATx cable
INTERCONNECT – carries 1
st
video
and data signals – connect to Local/
remote unit with CATx cable
