Black Box ACS4001A-R, Руководство пользователя

Страница: 38 / 119

DVI-D CATX SWITCH/SPLITTER
38
5. Diagnostic
5.1 CATX DVI-D-Switch for CATx
Each CATX DVI-D SWITCH is fitted with two indicator LEDs: Power and Link Status: The
Power LED is next to the Power socket. The Link Status LEDs are at the upper CATx-
connectors in the left and right upper corner. The LEDs in the left corners show the status for
the lower CATx- connectors, the right LEDs for the upper CATx- connectors.
The location of the LEDs is shown below:
Diagnostic- LEDs at CATX DVI-D-Switch for CATx
LED Appearance Diagnostics
Power LED
(Red LED)
Off
On Device not ready
Device ready
Link Status
(Orange LED)
Off
Orange On
Orange Blinking
Green On
Green blinking
No transmission over the CATx- cable
attached local/remote unit is disconnected,
switched off or a broken interconnect cable
Connection through CATx cable is OK
Actual CPU selected by push button ( only type
KVM- Switch )
active path ( only type KVM- Switch )
the active path has no connection through the trunk
cable (
only type KVM- Switch )
Diagnostic LED
Power
Diagnostic LED
Link Status
Lower connector
Diagnostic LED
Link Status
Upper connector