manualshive.com logo in svg

Black Box ACR1012A-T, Руководство пользователя

Поделиться
Скачать
Black Box ACR1012A-T Скачать руководство пользователя страница 43

Chapter 4: Configuration

724-746-5500   |   blackbox.com 

Page 43

4.14 Performing an upgrade

Agility Dual with VNC units are flash upgradeable using the method outlined here. However, for larger installations we recom-
mend that you use the ServSwitch iPath manager to upgrade multiple Agility Dual units. When using the method below, the 
Agility dual unit will be upgraded in sequence.

WARNING: During the upgrade process, ensure that power is not interrupted as this may leave the unit in an inop-
erable state.

If the upgrade process is interrupted and fails, it may be necessary to switch to the backup firmware image in order to regain 
operation. See next page for details.

4.14.1 To upgrade a single unit via network link

1  Download the latest upgrade file from Black Box technical support.  

Note: There are separate upgrade files for TX and RX units.

2  Temporarily connect the Agility Dual with VNC unit and a computer via a network (see 

browser-based configuration utili-

ty

 section for details).    

3  Run a web browser on your computer and enter the IP address of the Agility Dual with VNC unit to be upgraded.

4  Click the Firmware Upgrade link. Within the Firmware Upgrade page, click the Choose File button. In the subsequent file dia-

log, locate the downloaded upgrade file - check that the file is correct for the unit being upgraded.

5  Click the Upgrade Now button. A progress bar will be displayed (however, if your screen is connected to the unit being 

upgraded then video may be interrupted) and the indicators on the front panel will flash while the upgrade is in progress. 

6  The indicators should stop flashing in less than one minute, after which the unit will automatically reboot itself. The upgrade 

process is complete.

Содержание ACR1012A-T











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды