12
SCSI Fiber Optic Extender
To identify unmarked fiber connectors, attach both connectors at one end
of the cable to the SCSI Fiber Optic Extender and then switch on power to
the unit. Then visually examine both connectors at the opposite end of the
cable to determine which one is the transmit fiber. A faint red light will be
visible at the tip of one of the connectors. This indicates the transmit fiber.
This is the connector that should be attached to the receive (RCV) port of
the remote Extender unit.
3.7 Verify the Connection
Switch on power to both SCSI Fiber Optic Extenders and verify that the
LINK ACTIVE LEDs are lit on the front panels of both units. This confirms
that the local and remote units are communicating.
You may now switch on power to your attached computers and peripherals.
