16
NETWORK VIDEO CODEC
Select one of the video clips by clicking on it. As soon as it is selected, the video
clip starts replaying. You can control how the video clips are replayed using control
buttons similar to those on your home video recorder:
Use This Button…
To Do This…
>
Play
o
Stop
||
Pause
>>
Forward frame by frame at 10 s intervals
<<
Rewind frame by frame at 10 s intervals
|<
Replay from beginning
>|
Play end
o-o
Select another clip
4.1.4 A
SSIGNING A
TV C
HANNEL
The Codec automatically assigns a different TV channel to each camera on the
network. You can, however, decide yourself how you want to assign the channels.
These step-by-step instructions show you how to assign a specific TV channel to
a camera.
1. Select the Video Web page.
2. Click on the “?” button on the TV/Video control. This displays a list of
camera entries for all the cameras currently on the network. For each camera,
a channel number is displayed.
NOTE
A camera entry is displayed only if the camera’s Codec is powered on.
3. Click on the entry for the camera that you want to assign. The camera entry
is highlighted.
4. Click again on the camera entry. This time, only the channel number is
highlighted.
5. Edit the channel number, which can be any number between 1 and 99. If the
same channel has previously been assigned to a different camera, the new
assignment takes precedence and the Codec reassigns the other camera to
an unused channel.