Black Box AC506A-4A, Инструкция по эксплуатации

Страница: 12 / 21

Model AC506A-4A
10
3.3 RS-232 Control
The AC506A-4A can also be controlled via a serial device. The
unit operates at a baud rate of 4800 bps. From the serial port, you
have full control over the operation of the switched output; mode,
priorities, scan time and front-panel lock status.
Note on RS-232 port availability on your PC
Most PCs and notebooks do not have a serial port. So to program
the Switch you may need a USB to RS-232 Serial converter. Please
contact your Black Box sales representative if you need to buy one.
The AC506A-4A will output a menu to a serial port on power-up.
This menu will also be displayed when a “List” command is sent to
it via a serial port. To view the menu, An ASCII serial terminal or
terminal emulator software is needed. An example is Microsoft
Windows

HyperTerminal (generally found in
Accessories\Communication folder)
. To configure HyperTerminal
-
Connect direct to any available COM port
- 4800 Baud, 8 bits, No Parity, 1 Stop bit, No flow
control