VGA to VIDEO Ultimate Pro
VGA to VIDEO Ultimate Pro
Q: I’m not getting a picture on my TV or all I see is a test
pattern.
A: Take these steps:
1.
The Y-cable connected between the VGA port on the computer and
the VGA IN/OUT on the Internal Card is backwards. The end of the
cable with the Y-connection should be connected to the
Ultimate
Pro.
2.
Make sure the POWER and CHANNEL settings of your TV are
correct. If the TV has a remote control, make sure it is not being
triggered accidentally.
3.
Make sure that the correct type of input (VIDEO or S-VIDEO) is
selected on your TV. If possible, connect a VCR, camcorder or
other output device to the TV’s video input and make sure that the
TV is accepting input through the selected connector.
Q: When I connect my TV to the
Ultimate Pro
through a VCR,
I get no picture on the TV.
A: Take these steps:
1.
Make sure your VCR is outputting on the channel that your TV can
receive auxiliary input on. Consult your VCR’s manual if necessary.
2.
Make sure that the VCR is set to receive input from the VIDEO IN
or AUX.
Q: I
have DTV, EDTV or HDTV. Can I use the Y.Cb.Cr output to get a
digital display optimized for my digital TV?
A: No.
The Y.Cb.Cr output is converting the analog progressive VGA
signal into an analog interlaced signal for display on the TV. The
Y.Cb.Cr output offers the best clarity for scan conversion, but it is not
an analog to digital conversion.
13_______________________________________________
Temperature
Tolerance -
Operating: +10°C to +40°C
Storage:
-17.8°
to
43.3°
C
Humidity
Tolerance -
8% to 80% noncondensing
Size -
5” x 3”x 1.25” (12.5cm x 8cm x
3cm)
Weight -
.5 lb. (.23 kg)
_________________________________________________________
6