Black Box AC138A, Руководство пользователя, Страница: 18 / 24

16
Video to PC/HDTV Switching Scaler w/Audio
•
The ‘PC Loop Bypass’ must be enabled (which is the default
setting) in order to bypass the PC IN signal to the OUT
connector. When the ‘PC Loop Bypass’ is disabled, the ‘PC
BYPASS’ button is grayed out and the selection disappears
from the OSD.
•
On the AC138A, when ‘PC BYPASS’ is selected, the only
valid adjustment is ‘VOLUME’.
•
The software is broken down into 4 basic groups of controls:
o
Input
ƒ This is the Video Input source selection. PC Bypass is
only available when ‘PC LOOP BYPASS’ is enabled
in the ‘adjustment’ menu.
o
Output
ƒ This is where the video output should be directed.
o
AV Settings
ƒ These are the picture and audio volume control.
Clicking the ‘AV Reset’ button will change all of these
parameters back to there default settings.
o
Adjustments
ƒ These are the various settings that allow you to control
‘Bypass’, OSD, Digital NR, 3D enhancement, aspect
ratio, Front Panel locking, Video blanking, Video
freeze frame functions or if the Remote Control IR
Sensor is enabled.
•
As buttons are pressed on the unit, the control software will
mirror the settings as they are executed. Also as ‘buttons’ are
pressed in the control software, the OSD and units illuminated
buttons will change when appropriate.