8
Video to PC/HDTV Switching Scaler w/Audio
2. Installation
2.1 Connecting the Video inputs
The video scaler can accept a both TV and PC inputs and scale them to
your desired high resolution format output. The TV inputs are
composite video (BNC connector), S-Video (Mini-Din connector), and
an YPbPr input (3 RCA connectors). Both standard definition TV (SD)
and High Definition (HDTV) are supported. The unit also provides a
PC input that is also scaled for the output (note that PC input can also
be directly bypassed to the output without scaling if desired). Refer to
Figure 2.1 for a block diagram.
Rear Panel
S-Video:
Use an S-Video cable to connect the S-Video output of the
source video equipment to the connector labeled “S-Video” on the
back of the Video Scaler. The format can be NTSC, PAL, or SECAM.
Composite Video:
Use a Composite video cable to connect the
composite video output of the source equipment to the connector
labeled “Video” on the back of the Video Scaler. The format can be
NTSC, PAL, or SECAM.
YPbPr input:
Use a 3 RCA-to-3 BNC YPbPr cable to connect the
YPbPr output of the source video equipment to the device. The format
can be NTSC, PAL, or SECAM.
Computer RGB with H&V Sync:
Connect the source computer's
VGA output signal to the HD 15 connector labeled “PC In” on the
Video Scaler.