14
3270 REPEATER—FIBER
• Install the other end of the cable to the female
BNC connector on the Repeater.
Figure 3-2. Step 1. Connect the host signal to the Repeater.
2. Connect the Repeater
near the host
to the Repeater
near the terminal device
.
• Locate or build fiber cable that conforms to the
cable specifications (see
Chapter 1
) with male
fiber connectors at both ends.
• Connect one end of the first fiber cable to the
Repeater’s TX connector.
• Connect the other end of
that
fiber cable to the
second Repeater’s RX connector.
• Connect one end of the
second
fiber cable to the
Repeater’s RX connector.
Host 317x/327x
Repeater