Black Box 16-Port Rackmount 10/100, Руководство по установке

Страница: 64 / 90

58
The path and filename are case-sensitive and must be enclosed in quotation marks. When
attempting to boot across an IP router, you must configure the router to proxy-ARP for the
Terminal Server, or use the bootgateway feature. For more information, see Set/Define
Bootgateway in the Commands chapter of the Device Server Reference Manual located on
the CD-ROM.
13.3.1.2 NetWare
The LES.SYS file should be placed in the login directory on the NetWare file server. the
Terminal Server cannot actually log into the file server (since it knows no username/
password); it can only access files in the login directory itself. On the Terminal Server,
specify the file server name, filename, and path.
Figure 13-2: Configuring NetWare Reload
13.3.1.3 MOP
The LES.SYS filename is the only parameter that the Terminal Server needs to reload via
MOP. Make sure the service characteristic is enabled on the host's Ethernet circuit, copy
the LES.SYS file to the MOM$LOAD directory, and reload the Terminal Server using the
Initialize Reload command. Be sure to use binary mode for the file transfer.
Local> SET PRIVILEGED
Password> SYSTEM (not echoed)
Local>> DEFINE SERVER NETWARE LOADHOST fileserver
Local>> DEFINE SERVER SOFTWARE SYS:\LOGIN\LES.SYS
Local>> INITIALIZE RELOAD