Black & Decker Vacuum Cleaner, Руководство пользователя

Страница: 8 / 16

8
Temporarily parking the suction
head (fig. H)

Use the park position (22) for a
temporary parking of the suction head.
Storing the appliance (fig. I)
Warning! When storing the appliance,
switch the appliance off and unplug it.

Make sure that the cord is fully
rewound.

Place the appliance in an upright
position.

Park the tube in the park position (23).

Store the appliance in a dry location.
Maintenance
Your Black & Decker appliance has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation
depends upon proper appliance care and
regular cleaning.
Warning! Before performing any
maintenance or cleaning on the
appliance, unplug the appliance.

Regularly clean the ventilation slots
in your appliance using a soft brush
or dry cloth.

Regularly clean the motor housing
using a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Emptying the dust container
(fig. J & K)
The dust container (9) must be emptied
when the maximum mark is reached or
the bin full indicator (11) changes from
green to red.

Remove the hose.

Press the release button (24).

Hold the dust container at the handle
(25). Slide the container (9) out of the
appliance.

Hold the container over a waste bin.

Press the release button (26) to open
the container (fig. K). Empty the dust
container as necessary.

Close the base (27) by moving it
upward until the lock locates in the
latch.

Re-insert the container into the
appliance until it locks into place.
Cleaning (fig. J - N)
Warning! Before cleaning and
maintenance, switch the appliance off
and unplug it.

From time to time wipe the appliance
with a damp cloth. Do not use any
abrasive or solvent-based cleaner.
Do not immerse the appliance in water.
The appliance is fitted with 5 filters.
Four of these are accessible to the user
and are replaceable. The fifth filter is
internal to protect the motor. The four
filters are: pre-filter cover, main filter, bin
filter and exhaust filter.
Cleaning the dust container filter
(fig. J - M)
The dust container filter prevents dust
and dirt from entering the motor housing.
The filter is re-usable. There are two
levels of filtration: pre-filter and main
filter. To maintain efficient suction
performance, the filter should be cleaned
every week, or whenever suction
performance is noticeably reduced. The
appliance is fitted with a bypass valve.
When the filter is clogged, the operation
of the valve is audible. This is normal and
does not indicate a problem. Switch off
the appliance and remove the plug from
the socket before cleaning the filters.

Remove the container (9) from the
appliance (fig. J).

Empty the container (fig. K).

Remove the cartridge (28) from the
container by turning it clockwise (fig. L).

Remove the pre-filter cover (29) from
the main filter (30).

Shake off excess dust by tapping the
filter into a dustbin.
Warning! Do not brush or use
compressed air to clean the filter.

Depending on its condition, rinse the
outside of the filter with water.
Allow the filter to dry for 24 hours
before re-inserting it.
Warning! Do not wash the inside of the
filter.