6
7
Important:
Before you use it for the first time, disassemble the unit (see
HOW TO DISASSEMBLE section); wash all parts as instructed in the CARE
AND CLEANING section.
HOW TO ASSEMBLE AND USE
1.
Twist on the pulp separator on the base until the
lock arrow is matching the lock symbol (D).
2. Insert the cutter/strainer in the center of the pulp
separator. Press down until it snaps into place (E).
3. Twist on the clear cover on top of the pulp
separator with pusher in place (F).
4. Grip the pulp container and slide it in top-first until
it snaps into place (G).
Important:
Do not operate juice extractor without
pulp container in place.
5. Place a glass under the juice spout (H).
6. Cut food into pieces to fit the food chute.
7. Plug the power cord into an outlet. Press the on/off
(I/0) switch to the on (I) position.
8. Place food in the food chute and press lightly
with pusher.
9. When the pulp container is almost full, turn the
unit off (0) and unplug from outlet. Empty the pulp
container and clean the cutter/strainer before you
start juicing again.
Caution: The cutter/strainer teeth are very sharp.
Handle carefully.
10. When juicing is completed, turn the unit off (0) and
unplug from outlet
11. Turn the anti-drip spout clockwise to prevent
any spills.
E
F
1
D
H
F
2
G
JE2500B_29064_ESF_IB_C.indd 7
JE2500B_29064_ESF_IB_C.indd 7
12/2/21 12:11 PM
12/2/21 12:11 PM
