7
Replacing the filters
The filters should be replaced every
6 to 9 months and whenever worn or damaged. Replacement filters are available from
your BLACK+DECKER dealer (cat. no. PVF110):
• Remove the old filters as described above.
• Fit the new filters as described above.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
Troubleshooting
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Battery not charged.
• Check battery charging
requirements.
• Battery will not charge. • Charger not plugged in. • Plug charger into a working
outlet.
Refer
to
“Important
Charging
Notes”
for
more
details.
•
Check
current
at
receptacle
by
plugging in a lamp or other appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
the
lights.
• Surrounding air
• Move charger and tool to a
temperature too hot or
surrounding air temperature
too cold.
of above 40 degrees F(4.5°C) or
below
105
degrees
F
(+40.5°C).
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING:
The use of any accessory not recommended for use with
this tool could be hazardous.
K
J
