Black & Decker MX20356, Руководство пользователя

Страница: 9 / 16

9
shaft, push the attachment on to the drive shaft, and turn
it anti-clockwise.
9. To remove an attachment, push it on to the drive shaft, turn it
clockwise, then pull it off.
LOWERING THE ARM
a) Check that the appliance is switched off (0)
b) Hold the bottom of the appliance.
c) Turn the arm release to .
d) Press the arm down.
e) Let the arm release go.
THE SPLASH GUARD
10. The splash guard fits on top of the bowl.
11. The funnel lets you add ingredients without removing the splash guard.
12. With the bowl in position, and the arm down:
a) slide the splash guard between the arm and the bowl
b) Turn the splash guard towards you, so that you can add
ingredients easily.
c) Align the tabs on the sides of the funnel with the grooves in the
open part of the splash guard.
d) Slide the funnel down to cover the open part of the splash guard.
13. To remove the splash guard:
e) Lift the funnel off.
f) Lift the splash guard slightly, to clear the bowl rim.
g) Pull it out from between the bowl and the arm.
SWITCH ON
14. Sit the motor unit on a dry, firm, level surface, near a power socket.
15. Check that the speed control is set to 0.
16. Put the plug into the power socket.
SPEED CONTROL
17. Turn the speed control to the speed you want (1 = low, 8 = high).
18. Turn the speed control back to 0 to turn the motor off.
19. Generally, large quantities, thick mixes, and a high ratio of solids to
liquids suggest longer timings and slower speeds.
20. Smaller quantities, thinner mixes, and more liquids than solids
suggest shorter timings and higher speeds.