Black & Decker MT350, Оригинальное руководство пользователя

Страница: 9 / 72

9
ENGLISH
(Original instructions)
Protecting the environment
Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs replace-
ment, or if it is of no further use to you, do
not dispose of it with household waste.
Make this product available for separate
collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of
recycled materials helps prevent environmen-
tal pollution and reduces the demand for
raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local BLACK+DECKER office at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair
agents and full details of our after-sales
service and contacts are available on the
Internet at: www.2helpU.com.
EC declaration of conformity
MACHINERY DIRECTIVE
Multi-purpose Tool MT350
BLACK+DECKER declares that these
products described under "technical data"
are in compliance with: 2006/42/EC,
EN 60745-1:2009 + A11:2010,
EN 60745-2-1:2010, EN 60745-2-2:2010
BLACK+DECKER declares that the product
including the alternative accessory head as
described below are in compliance with:
These products also comply with Directive
2004/108/EC (until 19/04/2016)
2014/30/EU (from 20/04/2016) and
2011/65/EU. For more information, please
contact BLACK+DECKER at the following
address or refer to the back of the manual.
The undersigned is responsible for
compilation of the technical file and makes
this declaration on behalf of
BLACK+DECKER.
R.Laverick
Engineering Manager
BLACK+DECKER Europe, 210 Bath Road,
Slough,
Berkshire, SL1 3YD
United Kingdom
10.2015