Black & Decker KTX5000, Руководство пользователя

Страница: 6 / 21

6
ENGLISH
• Adjust Variable Speed Knob (4) for different
speed requirement.
• When continuous operation is required, first
depress the switch and then the lock-on
button (5) and release to disengage lock,
squeeze and release switch.
Warning: Continuous running of machine should
not exceed 30 minutes.
Replacing Carbon Brushes
(fig. D)
•
Use a screwdriver to remove the brush
holder cap.
•
Take out the worn carbon brush, insert the
new one and secure the brush hold cap.
Warning! Remove and check the carbon
brushes regularly. Replace when they wear
down to the limit mark.
Accessories
The performance of your tool depends on the
accessory used. Black & Decker and Piranha
accessories are engineered to high quality
standards and designed to enhance the
performance of your tool. By using these
accessories you will get the very best from your
tool.
Maintenance
Your tool has been designed to operate over a
long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
•
Regularly clean the ventilation slots in your
tool using a soft brush or dry cloth.
•
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
Technical data
KTX5000
Power W 600
No-load speed RPM 0-16,000
Air Volume m
3
/min 3.5
Weight Kg 1.7