Black & Decker KTM110, Руководство пользователя

Страница: 3 / 14

3
ENGLISH
SPECIFICATION KTM110
POWER W 1,200
NO-LOAD SPEED rpm 13,500
WHEEL DIAMETER mm
110
MAX. DEPTH OF CUT mm 34
WEIGHT kg 2.69
CABLE LENGTH m 2
––––––––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––––––
KTM110
110mm Tile/Marble Cutter
INTENDED USE
GENERAL SAFETY RULES
SAVE THESE INSTRUCTIONS.
1. Work area
a. Keep work area clean and well lit.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
c. Keep children and bystanders away while
operating a power tool.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
c. Do not expose power tools to rain or wet
conditions.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
TECHNICAL DATA
f. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication.
b. Use safety equipment. Always wear eye
protection.
c. Avoid accidental starting. Ensure the switch is
in the off position before plugging in.
d. Remove any adjusting key or wrench before
turning the power tool on.
e. Do not overreach. Keep proper footing and
balance at all times.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
g. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
4. Power tool use and care
a. Do not force the power tool. Use the correct
power tool for your application.
b. Do not use the power tool if the switch does not
turn it on and off.
c. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally
d. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
*For KTM110-TW, POWER is 1050W.
*For KTM110-TW, CABLE LENGTH is 3m.